Cammond Drag Scrapers
All-Purpose Drag Scraper
High Capacity Drag Scraper

 

 

 

 

 

 

These versatile units can perform countless jobs all year round. Level ditches, build terraces, fill low spots, clean sheds and pens, repair roads, spread gravel and top soil and several other earth moving projects.
       
   
Click photos to enlarge.    ap nt.jpg (87357 bytes) AP10 WITH TILT REAR.jpg (172836 bytes) AP10 WITH TILT.jpg (391965 bytes)


High Capacity Drag Scraper
The High Capacity scraper features the same proven design as the All-Purpose, but with a larger capacity bucket.
  hc1.jpg (135657 bytes) hc 2.jpg (43104 bytes) hc 3.jpg (88429 bytes)


All Purpose & High Capacity 
common features
  TILT AXLE 2.jpg (239040 bytes) TILT AXLE.jpg (237629 bytes) drag bucket with shank bar.jpg (94168 bytes) DRAG HITCH TYPES.jpg (132790 bytes) standard jack.jpg (160052 bytes)
Tilt-Axle option Shank bar option Choice of hitch Standard Jack
 		  
**PLEASE NOTE***
A hitch and an axle or axle system must be added to be a functioning unit. 
Lift and / or tilt features require hydraulic cylinders - not included.
FEATURES AND SPECIFICATIONS
  8' 10' 12' 14'
HITCH CHOICE OF FOUR, BOLT ON, INTERCHANGEABLE
CLEVIS, SWIVEL BALL, SWIVEL WITH CLEVIS, 
SWIVEL WITH SLOTTED HOLE
TONGUE 4 X 4 1/4" WITH STANDARD ROLL-UP JACK
TRACTOR HP/ AP UP TO 125HP MAX
TRACTOR HP /HC UP TO 175HP MAX
SIDE PLATE / AP 3/8 X 24 X 36"
SIDE PLATE / HC 1/2 X 30 X 40"
AXLE TILT OR NON-TILT OPTION
SINGLE OR DUAL WHEELS
CUTTING EDGE 1- 1/2 X 6" BOLT-ON REPLACEABLE & REVERSIBLE
MAIN BEAM 4 X 4 X 1/4" STEEL TUBE
BACK PLATE / AP 1/4 X 27 3/4" FORMED
BACK PLATE / HC 1/4 X 35" FORMED
CAPACITY / AP
(IN CUBIC YARDS)		 1 3/4 2 1/4 3 3 1/4
CAPACITY / HC
(IN CUBIC YARDS)		 2 1/2 3 1/4 3 3/4 4 1/4
STANDARD EQUIPMENT ROLL-UP JACK ON TONGUE,
WHEELS AND TIRES 
OTHER SHANK BAR OPTION IS A FACTORY INSTALL AND MUST BE ADDED AT THE TIME OF ORDER.

CYLINDER TRANSPORT LOCKS ARE ALSO AVAILABLE
 
 
 

Copyright 2010, Cammond Industries, A Subsidiary of Superior Fabrication, Inc.